Advertisement
Step 4:
• With the top still on the ground, take the base you previously set
to the side and insert the square tube onto the center post.
image below for the correct placement.
• Slide (1) washer onto each flat head bolt w/loctite. Place each of
them through the holes in the base.
• Secure base to the center tube by tightening the flat head bolts w/
loctite using a 4mm Allen wrench or 4mm hex bit and screw gun.
Center Post
wibenchmfg.com
Base
Specifications are subject to change. Product
images are for illustrative purposes only and may
differ from the actual product.
Assembly Instructions
Elevate Student Desk
Qty 4
See
1/4" x 110mm flat head bolt w/loctite (-ADJ)
1/4" x 82mm flat head bolt w/loctite (-EJA)
Qty 4
*Correct placement of
base:
base leg should line up
with the side of the top
with more overhang
from the front
507 E. Grant St. Thorp, WI 54771 • P - 800.242.2303
04068471: -EJA
04068604: -ADJ
16mm x 16ga washer
Longer edge of
4
Advertisement
