ADJ FOG FURY JETT PRO User Manual page 17

TRUSS MOUNTING
HANDLE ORIENTED
UPWARDS
Screw two clamps rated for 15-kg rated or more to the bottom of the unit using an M10 screw. The
clamp holes are located on each side of the unit.
Attach the eyehole screw to the side of the base and pull the safety-cable through the eyehole screw
and over the trussing system or a safe fixation spot. Insert the end in the carabine and tighten the
safety screw.
Use a second safety cable and insert the cable through the safety cable holes located on the bot-
tom panel of the unit, near the DMX and power ports. Insert the end in the carabine and tighten the
safety screw. Make sure that the unit is oriented with the carry handle facing upwards, as shown in
the diagram above.
17