ADJ FOG FURY JETT PRO User Manual page 10

dX - DMX Address Setting.
1. Press the MENU button until "dX" is displayed. "X" represents the currently selected DMX chan-
nel mode. There are 5 selectable DMX channel modes. See the DMX Traits section of this man-
ual for detailed information.
2. When you find your desired DMX channel mode, press the ENTER button. "A.XXX" will be dis-
played, where "XXX" represents the current DMX address. Use the UP or DOWN buttons to
adjust the DMX address as desired.
CH.X - Wireless remote channel setting.
1. Press the MENU button until "CH.X" is displayed. "X" represents the currently set remote chan-
nel (A-D). "A-D" corresponds to the buttons on the wireless remote. Example: If the fixture is set
to "CH.B", then the corresponding button on the remote will emit fog when the button is pressed.
Note: You can set more than one machine to the same wireless remote setting.
2. Press the ENTER button to access the color macro submenu. Use the UP or DOWN buttons
to scroll through and select 1 of 29 color macros or random macros. When you press the cor-
responding button on the wireless remote to the setting (A-d) you have selected on the unit, the
color you have selected will be the color that is displayed along with the fog that is emitted. Note:
When in any color submenu, after 4 seconds of no operation, fixture will revert back to "CH.A".
SYSTEM MENU
10