Table of Contents
Advertisement
C O M M I S S I O N I N G A N D T E S T I N G G U I D E
—
Managed Ethernet switches
—
To create a reliable Ethernet network for IEC
08 MX Config – location
61850 communication, a managed Ethernet
of globe icon
switch (e.g., from Moxa) is recommended to be
—
used. The most important settings of Moxa EDS
09 Broadcast
Search Filters
family Ethernet switches to be observed are
highlighted in this section.
This section provides the basic information on
how to make the initial setup of a typical Moxa
switch. User must refer to the correct User's
Manual and/or Instruction Manual for the Moxa
switch for details of how to completely setup
and/or program the Moxa ethernet switches. The
instructions within the Moxa User's Manual and/
or Installation Manuals take precedence over all
instructions within this guide.
Moxa EDS switches
If the IP address is unknown, disconnect all
Ethernet cables from the switch or turn other
connected Ethernet switches off. After
connecting a computer with the Moxa MXConfig
tool installed to any port on the Ethernet switch,
the following dialog screen appears (Figure 8).
This tool automatically searches the network for
those devices, which support the tool.
Click on the globe icon to open broadcast search
(Figure 8).
—
10
—
08
From the Broadcast Search screen select the
ethernet switch and click on "Search". (Figure 9)
This will take you to the properties dialog screen
for the selected ethernet switch (Figure 10)
—
09
9
Advertisement
Table of Contents
