Security Level; Access Codes; Voice Privacy; Personal Unblocking Key (Puk) Code - Nokia 6088 User Manual

S e t t i n g s
Edit (unavailable with no
number added), or
(unavailable with no number
added).
Note: When calls are
restricted, calls may be
possible to the official
emergency number
programmed into your
device.

Security level

Your device can be set to different
security levels to control device
use and memory settings. In the
standby mode, select
Settings > Security
level. Enter your security code (the
default security code is 12345),
and select OK and one of the
following options:
None—Disable security level
protection.
Memory—Enable memory
protection.
Phone—Enable phone protection.

Access codes

You can change your device access
codes. In the standby mode, select
Menu > Settings >
Access codes. Then choose the
following option:
68
Copyright © 2007 Nokia. All rights reserved.
Change security
Delete the security code (default is
12345) to a new one.
Change PIN
code to a new one.

Voice privacy

Voice privacy is a network service.
See
your wireless service provider
supports this feature, the voice
privacy feature protects the
privacy of your current phone
conversation from other callers
placing phone calls on your same
Menu > network. In the standby mode,
> Security select
Security
Off.
Personal unblocking key
(PUK) code
The PUK code is used to restore a
blocked PIN code. The PUK code is
8 characters in length and cannot
be changed. The PUK code must be
obtained from your wireless
service provider.
Security >
code—Change
code—Change the PIN
"Network services"
Menu > Settings
> Voice privacy
Important: If you enter an
incorrect PUK code 10
times in succession, the
UIM card is rejected and
can no longer be used. You
p. 70. If
>
> On or