Voice Commands; Hands-Free Operation - Nokia 6088 User Manual

S e t t i n g s

■ Voice commands

Before using voice tags, note the
following:
• Voice tags are not language-
dependent, but depend on the
speaker's voice.
• You must say the name exactly
as you said it when you
recorded it.
• Voice tags are sensitive to
background noise. Record voice
tags, and use them in a quiet
environment.
• Very short names are not
accepted. Use long names, and
avoid similar names for
different numbers.
Note: Using voice tags
may be difficult in a noisy
environment or during an
emergency, so you should
not rely on voice dialing in
all circumstances.

Hands-free operation

You can set as many as 9 voice
commands to enable hands-free
operation of certain features in
your device.
64
Copyright © 2007 Nokia. All rights reserved.
Assign a voice tag to a
command
Before using voice commands, you
must first add a voice tag to the
device function.
1. In the standby mode, select
Menu > Settings
commands.
2. Select the device function you
want to tag: Profiles,
mailbox, Voice
3. If necessary, select an option
associated with that function.
4. Select Start, and speak the
voice tag clearly into the
microphone. Do not select
unless you want to cancel the
recording.
The device replays and saves the
recorded tag. appears next to
commands with voice tags
assigned.
Activate a voice command
After you have associated a voice
tag with a function in your device,
to issue a command, speak the
voice tag.
1. In the standby mode, press and
hold the right selection key or
voice key.
> Voice
Voice
recorder, Log.
Quit