First Steps; Charging The Battery - Nikon Coolpix P1 Manual

First Steps

Charging the Battery

The camera uses a rechargeable Nikon EN-EL8 lithium-ion battery (supplied).
Charge the battery before first use or when the battery is running low.
1
Connect the power cable
Connect the power cable to the supplied MH-62 battery charger (1) and insert
the wall plug into a power outlet (2). The CHARGE lamp will light to show that
the charger is on (3).
2
Charge the battery
Remove the terminal cover from EN-EL8
and insert the battery into the MH-62.
CHARGE lamp starts blinking when battery
is inserted. Charging is complete when
lamp stops blinking.
About two hours are required to charge a
fully depleted battery.
CHARGE
lamp
Blinks Battery charging.
On Battery fully charged.
Battery error. If ambient temperature is not 0 to 40°C (32 to 104°F),
wait until temperature is in this range before charging. Otherwise
Flickers
unplug charger and remove battery immediately and take both
devices to retailer or Nikon-authorized service representative.
8
3
LITHIUM ION BATTE
CHARGE
1
Description
2