Nikon Coolpix P1 Manual page 171

Error Messages During Wireless Transfer Mode
Display
Transfer error
u
Profile not registered.
Set up profile.
u
u NETWORK
CONNECTION FAILED
Battery exhausted.
Transfer terminated.
w
u Failed to connect
to XXX
Connection error.
u
Problem
Error occurred
images were transferred
to computer.
A profile for wireless
transfer has not been set.
Camera could not con-
nect to wireless network.
Battery has become
depleted while images
were being transferred.
Camera could not con-
nect to selected profile
device (computer).
Wireless connection with
the profile device stopped
while the camera was
connected to the net-
work.
Solution
Check the signal.Remove
when
any obstacles between
the camera antenna and
the profile device.
Set profile device with the
Wireless Camera Setup
Utility or the optional PD-
10 wireless
adapter.
Check the selected com-
puter or access point.
Check the network set-
tings.
Charge the battery and
turn the camera on in
Wireless transfer mode.
Check the selected com-
puter.
Check the signal.Remove
any obstacles between
the camera antenna and
the profile device.
c
–
138
printer
141
8
141
–
159