Nikon Coolpix P1 Manual page 122

Images in the Memory
The pictures in the memory and on the memory card cannot be displayed simultaneously. To
display pictures in the memory, select either of the following:
• Remove the memory card from the camera (c13), and display pictures.
• Copy pictures stored in the memory to a memory card (c114), and display the pictures.
"Loop"
If Loop is selected in the starting screen, the slide show will repeat
automatically. To select or deselect the loop option, highlight Loop
and press d. A check mark next to Loop indicates that the loop op-
tion is selected.
Notes on the Slide Show
• If no operations are performed for 30 minutes after the slide show is started, the monitor
will turn off with Auto off, and the camera will turn off after three minutes. (Camera will
also turn off when Loop is set.)
• Movies are displayed as still images showing the movie's first frame.
Changing the Display Interval
The Slide show menu on the previous page and the
pause dialog shown above contain a Frame intvl option
for choosing how long each picture will be displayed. To
change the display interval, highlight Frame intvl and
press d. The menu of interval settings shown at right
will be displayed; highlight the desired setting and press
d.
Frame Interval
Due to differences in file size and the speed at which pictures can be read from the memory
card, the actual interval may differ from the value selected.
110
SLIDE SHOW SLIDE SHOW
Pause
Start
Frame intvl
Loop
Exit Confirm
FRAME INTVL FRAME INTVL
2s
3s
1
5s
10s
Exit Confirm