Table of Contents
Advertisement
SWITCH THE MACHINE OFF AND ALWAYS REMOVE THE KEY WHEN THE
STOCK PICKER IS NOT IN USE TO PREVENT UNAUTHORISED USE.
Multi-purpose joystick control
The joystick is used to control the following machine functions:
Transmission/steering
Cage lifting and lowering
Transmission mode
NOTE: the pedal switch must also be pressed and held to activate machine
functions.
STOCK PICKER ELEVAH 65-80 MOVE PICKING – Rev. 09_2019
USE AND MAINTENANCE MANUAL - SECTION 4
ATTENTION
PRESS THE DEAD MAN BUTTON
ON THE JOYSTICK, then move the
joystick in the required direction.
The transmission power is applied
proportionally to how far the joystick is
shifted from the centre.
Page 4-7
Advertisement
Table of Contents
