Table of Contents
Advertisement
USE AND MAINTENANCE MANUAL - SECTION 1
Danger of overturning
Before driving the machine, the user must be familiar with the work area
surface. While driving, do not exceed the admitted transversal and
longitudinal slopes.
Do not lift the basket or drive the machine with the basket raised (on a
machine with a self-propeller) on a slope or uneven or soft surface;
Before driving the machine on floors, bridges, lorries and other surfaces,
check their maximum capacity values.
Do not exceed the maximum capacity of the machine.
Keep the machine chassis at a minimum distance of 0.5 m from holes,
unevenness, descents, obstacles, debris, hidden holes and other
potential dangers found at ground level.
Do not attempt to use the machine as a crane. Do not tie the machine to
an adjacent structure.
Do not increase the dimension of the cage or loading platform with
unauthorised extensions or by extending the platform.
If the extending structure or cage remain jammed so that one or more
wheels are lifted from the ground, it is necessary for the operator to climb
off the cage, before attempting to free the machine. To stabilise the
machine and have personnel climb down from the cage, use a crane,
Stock Picker trucks or other adequate equipment.
(For machine without self-propeller) Do not move the machine with the
stabilisers engaged (if present) or with the extending structure raised.
Before moving the machine, completely lower the extending structure.
STOCK PICKER ELEVAH 65-80 MOVE PICKING – Rev. 09_2019
Page 1-6
Advertisement
Table of Contents
