Step 5
You will need
2 x Washers M8
2 x Bolts 25mm
(H4)
(H5)
Attach 2 x support legs (P8) to the centre rail (P7) using 2 x bolts (H5) and 2 x washers (H4)
as shown.
Step 6
You will need
4 x Washers M8
4 x Bolts 25mm
(H4)
(H5)
Adjust to be 10mm gap from floor
to the bottom of support legs.
Slot the centre rail (P7) into the headboard (P1) and footboard (P3).
Rotate bolts (H5) by using phillips head screwdriver (not provided) to the headboard (P1)
and footboard (P3). No need to tighten bolts until step 8.
fantasticfurniture.com.au
Phillips head
Screwdriver
(not provided)
Phillips head
Screwdriver
(not provided)
(P7)
(P1)
(P7)
(P4)
(H5)
(H4)
(P8)
(H4)
(H5)
(P7)
(P4)
(P3)
Page 7