Ublox NINA-B3 Series System Integration Manual page 62

Ex-It 2400 Foldable RP-SMA
Manufacturer ProAnt
Polarization Vertical
Gain +3.0 dBi
Impedance 50 Ω
Size Ø 10 x 83 mm
Type Monopole
Connector Reverse Polarity SMA plug (inner thread and pin receptacle)
Comment To be mounted with the U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for
use (Ex-IT 2400 SMA 70-002).
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Original part number at certification: Ex-IT 2400 RP-SMA 70-002
InSide TM -2400
Manufacturer ProAnt
Gain +3.0 dBi
Impedance 50 Ω
Size 27 x 12 mm (triangular)
Type Patch
Cable length 100 mm
Connector U.FL. connector
Comment Should be attached to a plastic enclosure or part for best
performance.
To be mounted with a U.FL connector.
For information about integrating the U.FL connector, see also the
Reference design for external antennas (U.FL
necessary to follow this reference design to comply with the
NINA-W1 FCC/IC modular approvals.
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
FlatWhip TM -2400
Manufacturer ProAnt
Gain +3.0 dBi
Impedance 50 Ω
Size Ø 50.0 x 30.0 mm
Type Monopole
Connector SMA plug (inner thread and pin)
Comment To be mounted with the U.FL to SMA adapter cable.
EOL. Use only for legacy products.
Approval RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
UBX-17056748 - R13
C1-Public
connector). It is
Regulatory information and requirements
NINA-B3 series - System integration manual
Page 62 of 72