Ublox NINA-B3 Series System Integration Manual page 61

GW.26.0111
Manufacturer Taoglas
Polarization Vertical
Gain +2.0 dBi
Impedance 50 Ω
Size Ø 7.9 x 30.0 mm
Type Monopole
Connector SMA (M) .
Comment To be mounted with the U.FL to SMA adapter cable.
Approval RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Ex-It 2400 28 RP-SMA
Manufacturer ProAnt
Polarization Vertical
Gain +3.0 dBi
Impedance 50 Ω
Size Ø 12.0 x 28.0 mm
Type Monopole
Connector Reverse Polarity SMA plug (inner thread and pin receptacle).
Comment
This antenna requires to be mounted on a metal ground plane for best
performance.
To be mounted with the U.FL to Reverse Polarity SMA adapter cable.
An SMA version antenna is also available but not recommended for use (Ex-IT
2400 SMA 28-001).
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Original part number at certification: Ex-IT 2400 RP-SMA 28-001
Ex-It 2400 28 U.FL-100
Manufacturer ProAnt
Polarization Vertical
Gain +2.0 dBi
Impedance 50 Ω
Size Ø 12.0 x 28.0 mm
Type Monopole
Cable length 100 mm
Connector U.FL. connector
Comment This antenna requires to be mounted on a metal ground plane for
best performance.
To be mounted with a U.FL connector.
For information about integrating the U.FL connector, see also the
Reference design for external antennas (U.FL
necessary to follow this reference design to comply with the
NINA-B3 FCC/IC modular approvals.
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Original part number at certification: Ex-IT 2400 MHF 28
UBX-17056748 - R13
C1-Public
connector). It is
Regulatory information and requirements
NINA-B3 series - System integration manual
Page 61 of 72