Service Mode; Inquiry Function; Factory Default Setting - Buffalo FB862 Instruction Manual

EN
13. User Option Mode
This allows the user to choose between various ways for the oven to operate.
1. Open the oven door and press "2" for 5 seconds to enter User Option mode.
2. The display shows "OP: - -".
3. Press any number button to enter related mode setting.
• For example: Setting the voice of the buzzer to medium. Press "2", "OP:22" is displayed. If you want
to change, keep pressing "2", the display will show "OP:20", "OP:21", "OP:22", "OP:23", "OP:20".....in
cycle.
4. Press to save the current setting. After saved, "OP: - -" is displayed again.
Notes:
• During setting, press
• If button not pressed at the last step, the program cannot be saved but returns to previous
state.

14. Service Mode

1. Open the door and press "3" for 5 seconds to enter service mode.
2. The display shows "SErU".
3. To check the times of closing or opening the door, just press number button "3", the display will show
the times.
4. Press then press number button "4" in 4 seconds, the message will be cancelled. "4-CL" is
displayed.
5. Press to enter Door Open Mode. Close the door to enter Ready Mode.

15. Inquiry Function

• During microwave cooking, press
• The display shows the power for 3 seconds then turns back to previous state.
• This function is available for multi-stage cooking.
16. Factory-default setting
In power up and ready mode, press
• If it is in the factory default setting, the display will show "11".
• If NOT in the factory default setting, the display will show "00".
• If desired to restore the default setting, press
factory-default settings are restored.
Note: Be careful of the operations as it will restore all the factory-default settings.
14
FB862_ML_A5_v2_20220527.indb 14 FB862_ML_A5_v2_20220527.indb 14
to enter Door Open Mode. Close the door to enter Ready Mode.
to check the power level.
and "0" to check the factory-default setting.
again. The display will show "11". Now the
2022/5/27 10:21 2022/5/27 10:21