Buffalo FB862 Instruction Manual page 11

7. End of Cook Cycle Mode
1. After a Manual Cook Mode or a Preset Program Cook Mode expires , the oven will enter End of Cook
Cycle Mode.
2. During this mode, "End" is shown.
3. If User Option OP:11 or OP:12 is selected, the oven will continue to sound until the user
acknowledges this by either opening and closing the door or pressing
selected, after 3 seconds beeping, the oven will enter Ready Mode.
8. Preset Program Cook Mode
1. This mode allows cooking through a one-button-touch operation. While in Ready Mode, press one of
the number buttons to run a Preset Program for relative cooking time.
2. The remaining cooking time is shown. If it is multi-stage cooking, the total remaining cooking time is
displayed.
Note: If the chosen program exceeds the maximum time allowed by User Option 7, the oven will
•
beep 3 times rapidly and display "00:00" to indicate the program is unacceptable.
3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.
9. On the Fly Cooking
1. While the oven is cooking, if User Option OP:51 is selected, pressing a number button will enable a
preset cooking program to start automatically.
2. The display shows the remaining cooking time.
3. When cooking program finishes, the oven will enter End of Cook Cycle Mode.
FB862_ML_A5_v2_20220527.indb 11 FB862_ML_A5_v2_20220527.indb 11
EN
. If User Option OP:10 is
11
2022/5/27 10:21 2022/5/27 10:21