Table of Contents
Advertisement
3. Firmly press the battery until it is securely connected in
the bay.
4. Connect the AC adapter to begin charging the battery.
Refer to the next section, "Connecting the AC Adapter,"
for connection information.
The color of the left status LED changes from amber to
green when the battery is fully charged.
Note:
time, allow ten hours for both the main and the
backup batteries to fully charge, even if the
indicator on the front of the MobilePro lights
green before the full ten hours are passed. You
must repeat this full ten hour charge cycle, only if
the backup battery becomes fully discharged.
To protect your data, do not use the system until
the backup battery is charged. Recharge the
battery whenever the battery charging LED lights
amber.
Connecting the AC Adapter
NECC recommends using the AC adapter if you
T
are recharging the main battery pack or the backup battery.
T
are using PC cards or Compact Flash™ cards.
T
are using the internal modem.
T
have your MobilePro on for long periods.
Before using the system for the first
Getting Started 1-7
Advertisement
Table of Contents
