Rutland County Garden Furniture PERGOLA FEET Assembly Instructions

Before you commence the assembly process, we recommend that you read these instructions
thoroughly beforehand to familiarise yourself with the fitment process and to also check that you have
the correct components. If for any reason you need assistance, you can find our contact details on the
final page of these instructions.
We highly recommend that any fitment is carried out on a flat, level surface and that you use another
person to assist you if necessary.
Package contents
Bolt down or spike pergola foot (or feet)
1 x 25mm flat drill bit
4 x Coachscrews & black covers caps OR sleeve
anchors (per bolt down foot, depending on
substrate).
1 x Wooden drive block (Spike version only)
Assembly Instructions
Pergola Feet
Tools required
Spirit/laser level
Electric drill or driver
Bolt down version (see Steps 6-9)
10mm socket or spanner (Coachscrews)
17mm socket or spanner and 10mm masonry
drill bit (Sleeve anchors)
Spike version (see Step 10-11)
Large lump or sledgehammer
Pergola Feet
1