Osm System Control Menu - NEC R 37 Xtra User Manual

Specific Item Settings
The above warning statement will appear to confirm that you do want to reset
individual settings.
NOTE:
• In addition to OSM controls, adjustments can be directly accessed with the
remote control keys. When adjusting with the remote control keys, the on-
screen display for the related adjustment appears instead of the OSM
menu.
• When OSM ON/OFF is set at OFF in the System Control menu(see the
following section ), OSM controls are not available while the remote control
direct access is possible.
OSM windows have the following elements:
Right-oriented delta symbol : indicates further choices are available. Use the
up or down keys to highlight the item. Pressing
+ proceeds to the selected control screen.
Left-oriented delta symbol : indicates that you can exit the current control.
Pressing - returns you to its original System
control menus.

OSM System Control Menu

The OSM System control menu allows you to set a various conditions of the
monitor.
Specific adjustment
NOTE: This control is available only when No. 8 pin of the DIP switch is set
item to be reset.
at the ON position. The DIP switch is located on the back cabinet.
OSM keys on the remote control unit function as follows:
POSITION CONTROL up/down : highlights one of the control items in the System
POSITION CONTROL +
POSITION CONTROL -
EXIT
POWER ON MODE
This control allows you to set the monitor to default to any one of its inputs
each time the monitor is turned on.
KEY CONTROL
This control allows you to disable the keys on the rear panel such as
PROCEED, EXIT, VIDEO 1, VIDEO 2, RGB 1, RGB 2, down, up, -, and +. If
you accidentally hit any one of the buttons, it does not affect the monitor.
control menus.
: proceeds to the selected menu choice.
: exits the current control and returns to its
original System control menus.
: exits the OSM controls.
39
40
25