Napoleon NZ26 Installation And Operation Instructions Manual page 8

8
This fireplace was tested to CAN/ULC S610 and UL 127 Zero Clearance Fireplace Safety Test Standard. In Canada, in
accordance with these standards, the unit may be connected to any accepted chimney listed to ULC-S629. The following
6" factory-built chimney systems may be used:
OLIVER MACLEOD
SECURITY
ICC
ENERGY VENT
GSW
SELKIRK METALBESTOS
AMERICAN METAL
SIMPSON DURAVENT
SIMPSON DURAVENT
Installation of all types of factory-built chimney systems is to be in accordance with the chimney manufacturers installa-
tion instructions. An appropriate chimney manufacturers anchor base plate and anchor base plate gasket is required in
order to initiate the twist lock mechanism. Use the high temperature gasket, supplied, to seal between the anchor plate
and the fireplace top. Air cooled chimney systems are not recommended in colder climates.
FIGURE 9 - STRAIGHT UP
No Off-Set. Minimum overall chim-
ney height is 11 feet.
* The first flue offset closest to the top of the
unit must be a minimum distance of 12 inches
from the top of the fireplace.
NOTE: 30° or 45° offsets may be installed back to back.
W415-0156 / A / 04.09.03
IN CANADA (ULC S610):
MODEL #
HT 6103( HT3103)
ASHT
EXCEL 2100-2
HT5103
FC
SS PLUS
---
---
---
FIGURE 10 - 2 ELBOWS
Single off-set with two 15°, 30° or
45° elbows. Minimum overall
chimney height is 11 feet.
IN U.S.A. (UL 127):
MAXIMUM # OF OFFSETS
(30 MAX.)
(45 MAX.)
4 - 45 4 - 30
4 - 45 4 - 30
4 - 45 4 - 30
4 - 45 4 - 30
2 - 45 & 2-15 4 - 30
2 - 45 2 - 30
--- 4 - 30
--- 4 - 30
--- 2 - 30
*
Double off-set with four 15°, 30° or
45° elbows. Minimum overall chim-
ney height is 11 feet.
MODEL #
HT 6103( HT3103)
ASHT
EXCEL HT
HT5103
SC
SS II
HS
DURA CHIMNEY
DURA PLUS
*
FIGURE 11 - 4 ELBOWS