Gigaset COMFORT 500HX Manual page 46

Setting the handset
Handset update
The handset supports firmware updating via the DECT radio link to the base/router
(SUOTA = Software Update Over The Air).
The base/router to which the handset is registered must also support this function
( www.gigaset.com/compatibility)
The phone checks whether new firmware is available for the handset. If it is, a message is
displayed.
Start the firmware update with Yes.
Enable/disable automatic check for new firmware:
Settings
Automatic Check
Start the firmware update manually
Settings
Update OK
The update process may take up to 30 minutes. During this time, only restricted
handset use is available.
Checking the firmware version
Settings
Current Version
46
OK System
OK Change (
OK System
OK . . . if there is new firmware, the update will start
OK System
OK . . . the firmware version of the handset is displayed
Availability and operation of the functions
may differ on your telephone.
OK Handset Update
= enabled)
OK Handset Update
OK Handset Update
OK
OK
OK