Total TTAC1601 Quick Start Manual

Automatic air compressor

Table of Contents

Download this manual

AUTOMATIC AIR COMPRESSOR

Table of Contents

Need help?

Do you have a question about the TTAC1601 and is the answer not in the manual?

Page 1 AUTOMATIC AIR COMPRESSOR...
Page 2 Security instructions Caution Please read the operating instructions carefully and observe the notes provided. Save the instructions for future reference. Use the instructions to familiarize yourself with the product, its proper use and the safety notes. Safe operation of this machine is only possible when the operating or safety information is fully read and the instructions contained therein are strictly followed.
Page 3 The appliance may overheat if it is used continuously for more than 10 minutes. Switch off the appliance immediately and let it cool down for at least 10 minutes. 3) Storage and maintenance a. Disconnect tool plug from power source before making any adjustments, changing accessories, or storing power tools.
Page 4 Start up Mounting of accessories Your inflator is supplied with the standard cone nozzles and the needle inflator nozzle, which are located on the bottom of the unit. Remove the necessary accessories from the accessory compartment. • To use the accessory you need, make sure the inflator lever is in the up position as shown in the picture.
Page 5 When the item to be inflated has reached the preset value, the unit will • automatically turn off. Note: You may notice that the actual pressure reading may drop after a couple of seconds. • To stop the inflator at any time, press the main switch (1) to the off position. •...
Page 6 Exploded view...
Page 7 AUTOMATIC AIR COMPRESSOR...