Table of Contents
Advertisement
19.3 Removing the ilter
Replace the ilter (C4) when "REPLACE WATER SOFTENER FILTER,
PRESS OK TO START
place the ilter immediately, press "
structions from point 3.
To replace the ilter later, press "
appears on the display to remind you that the ilter needs
replacing.
To use the appliance without the ilter, proceed as follows:
1. Extract the tank (A16) and exhausted ilter;
"
2. Press "
(B2) to enter the menu;
3. Press <(B10) or > (B8) until " WATER FILTER" appears on
the display;
4. Press "
";
5. " REMOVE FILTER" appears on the display;
6. Press "
";
7. "
CONFIRM REMOVE FILTER": press "
press "
ESC" to go back to the settings menu);
8. "
REMOVE FILTER COMPLETED": the change has
been saved. Press "
Please note!
After two months (see date indicator) or when the appliance has
not been used for 3 weeks, you should replace the ilter even if
the message has not yet been displayed.
22.
DISPLAYED MESSAGES
DISPLAYED MESSAGE
FILL TANK WITH FRESH
WATER
INSERT WATER TANK
" appears on the display (B). To re-
OK" and follow the in-
ESC". The
OK" to go back to the homepage.
POSSIBLE CAUSE
Insuicient water in the tank (A16).
The tank (A16) is not correctly in place.
20. TECHNICAL DATA
Voltage:
Power:
Pressure:
Water tank capacity:
Size LxDxH:
symbol
Cord length:
Weight:
Beans container capacity:
The appliance complies with the following EC
directives:
•
European Standby Regulation 1275/2008
•
Materials and accessories coming into contact with food
conform to EEC regulation 1935/2004.
21. DISPOSAL
OK" (or
The appliance must not be disposed of with house-
hold waste, but taken to an authorised waste separa-
tion and recycling centre.
24
220-240 V~ 50/60 Hz max. 10 A
1,5 MPa (15 bar)
260x480x375 mm
SOLUTION
Fill the tank with water and/or insert it cor-
rectly, pushing it as far as it will go until it
clicks into place.
Insert the tank correctly and press as far as it
will go.
1450 W
2 l
1750 mm
12,4 kg
400 g
Advertisement
Table of Contents
Troubleshooting
