Advertisement
Quick Links
HP – HP24F
Instruction
manual
The VESA adapter is compatible with the following
products from hp: 24f, 22f, 27f, 22fw, 24fw, 27fw.
The VESA adapter allows you to conveniently mount your
HP brand monitor to a monitor arm with a VESA hole
pattern (75 x 75mm). Use the included screws and nuts for
this purpose.
If you want to mount your VESA adapter directly to the
wall, use suitable screws and dowels for this purpose. (not
included in the scope of delivery)
www.3idee.eu
Advertisement
Related Manuals for 3idee HP-HP24F
Summary of Contents for 3idee HP-HP24F
- Page 1 (75 x 75mm). Use the included screws and nuts for this purpose. If you want to mount your VESA adapter directly to the wall, use suitable screws and dowels for this purpose. (not included in the scope of delivery) www.3idee.eu...
- Page 2 Instruction manual Assembly instruction Step 1: Remove the base of your monitor. Step 2: Mount the adapter on the VESA connector of your monitor arm or on the wall. (Figure 1). Figure 1 Step 3: Plug the monitor onto the adapter so that it audibly clicks into place. Note: Apply a little pressure if necessary!
- Page 3 The adapter is made of high quality We wish you a lot of fun with your product. polylactide (PLA) plastic. PLA is both a colorfast and UV-resistant material and Your 3idee Team has low flammability. Polylactide has a low temperature resistance of about 45°C-55°C 3idee SARL...