Related Manuals for Kanmed Babybed
Summary of Contents for Kanmed Babybed
- Page 1 User Manual Art no: BB1-070/1 March 2007 Caution Please read this manual carefully. Incorrect use may cause patient injury. Manufactured by: KANMED AB www.kanmed.se Distributed by:...
-
Page 2: Table Of Contents
5 Cleaning and Maintenance ....................6 6 Trouble shooting ......................6 7 Warranty Statement ....................6 8 Technical Data ......................7 9 Technical service and maintenance ................8 10 Spare parts/Accessories....................9 11 EMC guidelines ......................9 KANMED BABYBED TWIN VERSION AND FIXED HEIGHT VERSION Page 2 of 12... -
Page 3: General Description
User Manual BB1/070/1 1 General Description The intended use of the Kanmed Babybed is to provide an ideal bed for premature and new born babies in hospital. It is also intended to be used with the Kanmed Babywarmer system. It is designed for hospital use only and must be used according to the instructions given in this manual, according to your established clinical routines and by qualified personnel. -
Page 4: Preparations Before Use
The Kanmed Babywarmer control unit is hung on its bracket under the bed. The heating pad cable is preferably thread through one of the holes in the bed and connected to the control unit. The Kanmed Babywarmer is connected to mains power by its own cable. 3.6 First cleaning The unit is factory clean but must be cleaned according to your hospital routines. -
Page 5: Handling And Daily Use
At the same time, press the bed’s corner upward or downward till the desired tilt is achieved. The release handle can be reached and manoeuvred from both sides of the bed. 4.6 Accessories Note! Only use accessories approved by KANMED. Respect the load limits. Page 5 of 12... -
Page 6: Cleaning And Maintenance
7 Warranty Statement KANMED warrants the purchaser that the Babybed is free from defects in materials and workmanship for a period of 12 month from the date of delivery. The sole obligation of KANMED with respect to any such defect is limited to the repair with new or re-manufactured parts or, at the discretion of KANMED, replacement of the equipment or refunding of the purchase price. -
Page 7: Technical Data
The Kanmed Babybed contains no electronics sensitive to EMC. Highly sensitive equipment connected to the same electrical outlet as the Kanmed Babybed may be affected by the lifting column electrical motor. The motor may generate a moderate amount of flicker during start. -
Page 8: Technical Service And Maintenance
User Manual BB1/070/1 9 Technical service and maintenance NOTE: All spare parts used for replacement or repairs shall be supplied by KANMED or its authorised distributor. Use of “non KANMED permitted parts” automatically transfers all safety responsibilities to the hospital. Only qualified personnel shall attempt repairs. -
Page 9: Spare Parts/Accessories
11 EMC guidelines Guidance and manufacturer’s declaration – electromagnetic emissions The Babybed is intended for use in the electromagnetic environment specified below. The customer or the user of the Babybed should assure that it is used in such an environment. - Page 10 Guidance and manufacturer’s declaration – electromagnetic immunity The Babybed is intended for use in the electromagnetic environment specified below. The customer or the user of the Babybed should assure that it is used in such an environment.
- Page 11 RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the Babybed is used exceeds the applicable RF compliance level above, the Babybed should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the Babybed.
- Page 12 KANMED AB Gårdsfogdevägen 18B SE-168 66 BROMMA – Stockholm Sweden Telephone +46 8 56 48 06 30 Telefax +46 8 56 48 06 39 E-Mail: info@kanmed.se Home page: www.kanmed.se Distributed by :...
Need help?
Do you have a question about the Babybed and is the answer not in the manual?
Questions and answers