Related Manuals for Kanmed BABYWARMER
Summary of Contents for Kanmed BABYWARMER
- Page 1 User Manual Art. No BW-50-070/10 2007 03 0413 Caution Please read this manual carefully. Incorrect use of patient warming equipment may cause patient injury. Manufactured by: KANMED AB Sweden Distributed by:...
-
Page 2: Table Of Contents
13 Warranty ....................... 15 14 Disposal ........................ 15 NOTE: This manual is valid for all KANMED Baby Warmer of model KBW50 recognised by the blue silicone rubber edges on the control unit. This user manual contains important safety information and must be read carefully and shall be saved for future reference. -
Page 3: Kanmed Baby Warmer - Quick Instruction
Ensure that the bed has holes in the bottom. Place the Baby Warmer on the cot mattress. Place the Baby Warmer in the KANMED Baby Bed or any other suitable bed. Protect the Nest with a sheet that is soft but not too thick. -
Page 4: Safety Instructions
BW-50-070/10 Safety Instructions Please read this manual carefully and you will find the KANMED Baby Warmer to be easy and safe to use. Intended use The intended use of the KANMED Baby Warmer is to keep newborn and premature babies normothermic. -
Page 5: General Description
Likewise, a too warm Water Mattress can give the baby a fever. • Check the integrity of the KANMED Baby Nest so that the filling material does not leak out. Replace the nest after one year of use. •... - Page 6 User Manual BW-50-070/10 Control Unit The Control Unit can be connected to all existing mains power supply voltages (observe fuse change) and frequencies or be battery powered from 12 - 24 Volts. See technical section. The handle is designed so that the control unit can be safely hung on the edge of the bed or on the bed frame.
- Page 7 Different types of KANMED Baby Nests are available. Please check with your supplier or on internet www.KANMED.se The KANMED Baby Nest is intended to prevent the baby from rolling off the water mattress, to facilitate correct positioning and to create a tight and cosy environment around the baby.
-
Page 8: Description Of Functions
Ensure that all parts are available and in good condition. See also the video “Handling Instructions” Always place the KANMED Baby Warmer on the ordinary mattress of a baby cot or any other surface that is heat insulating. Daily use and practical hints Always leave the unit switched on, even in the storage room, so that the water mattress is warm and ready. -
Page 9: Cleaning And Maintenance
BW-50-070/10 When transporting in an ambulance (ground or air) The KANMED Baby Warmer can be powered from a 12 - 24 Volt battery. During transport it will keep the baby warm and provide a soft chock absorbing support. NOTE: When powering with 12V battery the warming capacity is reduced, see technical section. Note that local restrictions and rules apply for transport of patients. - Page 10 The Water Mattress should be changed at least every third year to avoid leakages KANMED Baby Nest The Baby Nest is a consumable. The KANMED Baby Nest containing filling material must be changed as soon as it shows signs of damage or wear, at least after one year of use.
-
Page 11: Alarm Functions And Indication
User Manual BW-50-070/10 Alarm functions and indication In case of an alarm, the associated red lamp will be lit and the beeper will sound intermittently. Only the ∆T alarm can be silenced for 10 minutes by pressing the alarm button. All other alarms require some action. -
Page 12: Safety Systems Available
User Manual BW-50-070/10 The Heating Pad is not inserted Correct the position of the in the Water mattress or there Heating Pad and/or add water lamps is lit is no water in the mattress, in the Water Mattress. The Heating Pad is not Check pad connection lamp is lit connected,... -
Page 13: Accessories, Spare Parts And Technical Documentation
User Manuals in many languages can be downloaded from www.KANMED.se KANMED or your local distributor will provide a spare part price list as well as a service manual that contains all information necessary to perform maintenance, and simpler repairs. -
Page 14: Technical Data
Length 600 mm, With 270 mm, Height 30 mm, Other sizes might be available. Please contact your local supplier. Weight about 0.5 kg Material Anti Algae recommended KANMED Bottle 119 ml fluid Poly [Oxyethylene (dimethylimino) ethylene (dimethyliminio) ethelyenedichloride] 10% Inert ingredients 90% KANMED Baby Nest Dimensions... -
Page 15: Warranty
The KANMED Baby Nest and associated parts are warranted to be free of defects at the time of delivery. The sole obligation of KANMED with respect to any such defect is limited to the repair with new or re- manufactured parts or, at the discretion of KANMED, replacement of the equipment or refunding of the purchase price. - Page 16 User Manual BW-50-070/10 KANMED AB Gårdsfogdevägen 18B SE-168 66 BROMMA – Stockholm Sweden Telephone +46 8 56 48 06 30 Telefax +46 8 56 48 06 39 E-Mail: info@KANMED.se Home page: www.KANMED.se Distributed by: Page 16 of 16...
Need help?
Do you have a question about the BABYWARMER and is the answer not in the manual?
Questions and answers