Quectel EC200T Hardware Design page 13

PCM Interface
USB Interface
Antenna Connectors
Rx-diversity (Optional)
AT Commands
Physical Characteristics
Temperature Range
Firmware Upgrade
RoHS
NOTES
1)
1. Within operation temperature range, the module is 3GPP compliant.
2)
2. Within extended temperature range, the module remains the ability to establish and maintain a
voice, SMS, data transmission, etc. There is no unrecoverable malfunction. There are also no effects
on radio spectrum and no harm to radio network. Only one or more parameters like P
in their value and exceed the specified tolerances. When the temperature returns to normal operation
temperature levels, the module will meet 3GPP specifications again.
"*" means under development.
3.
EC200T_Mini_PCIe_Hardware_Design
Used for audio function with external codec
Support 16-bit linear data format
Support short frame synchronization
Support master and slave modes
Compliant with USB 2.0 specification (slave only); the data transfer rate
can reach up to 480Mbps
Used for AT command communication, data transmission, software
debugging, and firmware upgrade
Support USB serial drivers for: Windows 7/8/8.1/10, Linux 2.6~5.4, Android
4.x/5.x/6.x/7.x/8.x/9.x, etc.
Include main antenna and diversity antenna connectors
Support LTE Rx-diversity
Compliant with 3GPP TS 27.007, 27.005 and Quectel enhanced AT
commands
Size: (51.0± 0.15)mm × (30.0± 0.15)mm × (4.9± 0.2)mm
Weight: approx. 9.7g
Operation temperature range: -35° C to +75° C
Extended temperature range: -40° C to +80° C
Storage temperature range: -40° C to +90° C
Upgrade via USB interface or FOTA
All hardware components are fully compliant with EU RoHS directive
LTE Standard Module Series
EC200T Mini PCIe Hardware Design
1)
2)
might reduce
out
12 / 45