Graphics Overlaying The Video - Motorola TIME WARNER DCT6200 User Manual

GRAPHICS OVERLAYING THE VIDEO

The DCT* can generate graphics that overlay the video programming or
fill the entire television screen. Common examples include on-screen
menus (such as the User Setting menu), closed captions, and interactive
program guides. The DCT* overlays these graphics whenever you open
a menu, enables closed captions, or scrolls through a program grid.
Overlaying graphics are not available on all DCT* video output and mode
combinations. The following table summarizes the availability of
overlaying graphics for each DCT* video output combination:
DVI or DCT6200
YPbPr Primary Video
Output Output
Mode (DVI or YPbPr)
1080i
Graphics overlay
supported
720p Graphics overlay
supported
480p Graphics overlay
supported
480i Graphics overlay
supported
The 4:3 Override feature enables you to specify a different Output Mode
for high-definition (DVI or YPbPr) programming and standard-definition
(4:3) programming. If the 4:3 Override is set to 480i and the subscriber
tunes to a 4:3 standard channel, the DCT* displays graphics overlays on
all outputs even if the DVI or YPbPr Output Mode is 1080i, 720p, or
480p.
DCT6200 Secondary Video Output
S-Video Out
Video only Video only
Video only Video only
Video only Video only
Graphics Graphics
overlay overlay
supported supported
32
Composite
RF Out
Out
Video only
Video only
Video only
Graphics
overlay
supported