Motorola TIME WARNER DCT6200 User Manual page 25

Connecting HDTV – Video Only
1
Connect an RF coaxial cable to the cable wall outlet and the
CABLE IN
connector on the DCT*.
2
Connect the component video cables to the Y, Pb, and Pr
connectors on your HDTV and DCT*.
Connect a DVI cable to the
-
DVI HDTV
the
These connections support only the high-definition video connection
between the DCT* and the HDTV. To connect the audio connections for
your HDTV, proceed to the following page. To connect your audio
connections for an A/V receiver, go to "Connecting Your DCT* to an A/V
Receiver – Audio Only".
For information on configuring your DCT* settings, see "Optimizing Your
DCT* Output Settings".
DVI
connector on your TV.
DCT6200/DCT6208 User Guide
Or
-
D OUT
connector on the DCT* and
17