Entering/Changing Handset Name
It is possible to assign a name to each handset. This name is then displayed when
the phone is in Standby mode.
1.
Press the
key as often as necessary until the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Enter/Change the name of the handset (e.g. MOBIL 1).
Note: To enter the characters, press the relevant key the corresponding number of
times, 1, 2, 3 or 4 times, according to the position on the key . Press the 5 key
three times for an L, for example.
6. Press the
Saving a Prefix
It is possible to save prefix numbers in the handset. This number is then recalled after
pressing the 0 key for two seconds.
1.
Press the
key as often as necessary until the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Enter the prefix number (e.g. access code of the subscriber you call most
frequently).
6.
Press the
Switching the Key Tone On/Off
1.
Press the
key as often as necessary until the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Press the
or
6.
Press the
Automatic Call Answering
The automatic call answering function (auto answer on) enables an incoming call to be
taken immediately when the handset is lifted from the base station (or charger unit)
without pressing the
1.
Press the
key as often as necessary until the HANDSET menu appears.
2.
Press the
3.
Press the
or
4.
Press the
5.
Use the
or
6.
Press the
30
key.
key to select the HS NAME submenu.
key.
key to confirm the input.
key.
key to select the PREFIX MEM submenu.
key.
key to confirm the input.
key.
key to select the KEY TONE submenu.
key.
key to select the setting.
key to confirm the setting.
or
button.
key.
key to select the AUTO ANS submenu.
key.
key to switch automatic call answering on or off.
key to confirm the setting.
29