Clock & Alarm; Set Date And Time; Set Alarm; Set Alarm Melody - Motorola D1010 Series User Manual

6. Clock & Alarm
If you subscribe to your network's Caller Identification service, the time on
your D1011 may be set automatically each time you receive a call,
depending on your network provider.
You can also set or adjust the time using the Clock & Alarm menu.

Set date and time

m d
CLOCK/ALARM
1. Press and scroll to
m
DATE & TIME
, then press .
2. Enter the date using the format
m
3. Press and enter the time using the 24 hour format
e.g. 14:45 for 2.45pm.
m
4. Press to confirm.
>
5. Press to return to standby.
NOTE
The date and time is retained during a power failure or when the batteries
are discharged.

Set alarm

m d
CLOCK/ALARM
1. Press , scroll to
d
SET ALARM
2. Scroll to and press
u d
OFF ON ONCE
3. Scroll or to ,
ON ONCE ON DAILY
4. If you select or
HH - MM
format e.g 14:45 for 2:45pm and press
>
5. Press to return to standby. When the alarm goes off, press any
key to stop the ring.
NOTE
Once the alarm is set to on, the
The alarm will ring at the medium level.
the display.
Clock & Alarm
m
. Press . Display shows
DD/MM 04/ 08
e.g. for 4th August.
HH:MM
m
and press .
m
.
m
ON DAILY
or and press .
, enter the time using the 24 hour
m
.
icon is displayed.
ALARM ON
and the will flash on

Set alarm melody

There are three alarm ringtones.
m
1. Press and scroll
m
Press .
d
ALARM TONE
2. Scroll to
- Melodies are played.
u d
3. Scroll or and press
,
d
CLOCK/ALARM
to .
m
and press .
m
.
19