Table of Contents
Advertisement
Getting Online
Now your Roam X is installed and you have inserted the SIM card, it's time to get connected. To do this, you
will need to be using a device which can connect to a Wi-Fi network such as a smart phone, Smart TV, tablet or
laptop.
1. Turn on router and allow 2 to 3 minutes for the router to boot.
When ready, the router name will be visible in your devices Wi-Fi settings.
There are 2 methods of connecting your device to the routers Wi-Fi network.
• Option A – Using device settings
• Option B – Using QR Code
Option A: Device Settings
1.
Navigate to your devices Wi-Fi
settings and view available Wi-Fi
networks.
2.
The Roam X Router will be
displayed as RUT240_XXXX.
The last 4 characters will be
unique to your Roam X Router.
If more than one Roam X is being
used within close proximity, the
Wi-Fi network name is displayed
on the back of the router.
See page 12 for code.
3.
Once you select this network,
you must enter the password. This
is also printed on the back of the
router.
Note: Password is case
!
sensitive.
See page 12 for code.
Note:
!
Two WiFi networks of the router are displayed. The 2.4GHz
network is designed for range the 5GHz network is designed for
data throughput.
4.
You are now connected and can
begin using your Roam X.
13
Advertisement
Table of Contents
