Table of Contents
Advertisement
MAINTENANCE AT 125 HOURS
Perform the following after each 125 hours of operation.
1. Clean battery and cable connectors.
2. Service cooling system. See Engine Operation Manual for instructions.
MAINTENANCE AT 250 HOURS OR 3 MONTHS
1. Check engine air filter system. See pages 15 – 16. See Maintenance Materials
Specifications page 4 for replacement engine air filters.
2. Inspect air intake system. Tighten or replace parts as necessary to make sure air
intake system does not leak.
3. Change engine oil and oil filter. See Maintenance Materials Specifications page 4 for filter and oil
specifications. After oil and filter change run engine at idle and check for leaks at
filter and drain plug.
4. Service battery and cable connectors.
5. Service cooling system See Engine Operation Manual for instructions.
6. Check and adjust conveyor belts and woodchuck chain.
MAINTENANCE AT 500 HOURS OR 6 MONTHS
1. Perform Daily Maintenance
2. Perform 125 Hour Maintenance
3. Perform 250 Hour Maintenance
17
Advertisement
Table of Contents
