Related Manuals for JackRabbit 30/36
Summary of Contents for JackRabbit 30/36
- Page 1 OWNER'S OPERATOR MANUAL ELEVATOR 30/36 (C3.4B) WOODCHUCK AVAILABLE OPTIONS: DESTICKER SERIAL NUMBER : *** JACKRABBIT Phone (209) 599-6118 ● Fax (209) 599-6119 WWW.JackrabbitEquipment.COM...
-
Page 3: Table Of Contents
TABLE OF CONTENTS ELEVATOR (C3.4B) 30/36 - WOODCHUCK INTRODUCTIONS SAFETY AT A GLANCE OPERATIONS PROCEDURES MAINTENANCE TROUBLE SHOOTING... -
Page 5: Introductions
WARRANTY: JACKRABBIT Warrants Each New Piece Of Equipment And Parts Manufactured By It To Be Free From Defects In Material And Workmanship Under Normal Use And Service. The Obligation Of JACKRABBIT Shall Be Limited To Replacing Any Part Which Shall, Within 1 Year (1 Season) After Delivery To The Original Purchaser, Be Returned To JACKRABBIT With Transportation Charges Prepaid And Which An Examination By JACKRABBIT Discloses Defective. -
Page 6: Safety
SAFETY NOTICE SAFETY CAUTION Read And Understand This Manual And All Safety Indicates a potentially hazardous situation that, if not Signs Before Operating And Maintaining. Review The avoided, may result in minor or moderate injury. It Safety Instructions And Precautions Annually. may also be used to alert against unsafe practices. - Page 7 SAFETY NOTICE The Rims And Tires Should Be Mounted On The SAFETY DECAL CARE Keep Safety Signs Clean And Legible At All Feeder With The Valve Stem To The Inside. We Times. Use Reverse Disc Rims As A Protection That ...
- Page 8 SAFETY NOTICE Practice Operation Of Your Equipment And Its Chain Should Be Obtained And Installed. Always Attachments. Completely Familiarize Yourself Follow State And Local Regulations Regarding A And Other Operators With Its Operation Before Safety Chain And Auxiliary Lighting When Using.
- Page 9 SAFETY NOTICE The Use Of Flashing Amber Lights Is Acceptable HIGHWAY AND TRANSPORT OPERATIONS In Most Localities. However, Some Localities Prohibit Their Use. Local Laws Should Be Adopt Safe Driving Practices: Checked For All Highway Lighting And Marking Requirements. ...
- Page 10 SAFETY NOTICE HIGHWAY AND TRANSPORT Make Sure All Parked Machines Are On A OPERATIONS (CONT.) Hard, Level Surface And Engage All Safety Avoid Overhead Wires Or Other Obstacles. Devices. Contact With Overhead Lines Could Cause Serious Injury Or Death. ...
- Page 11 Weighing 8,000 Lbs. At Speeds Up To 55 Mph. SAFETY INSTRUCTIONS 12. Danger: Danger Always Check And Make Sure Elevator’s Never Tow The 30/36 Elevator At A Speed Above 55 Mph. Operational Site Is A Safe Distance From Power Lines. 13. Danger:...
-
Page 13: At A Glance
AT A GLANCE ELEVATOR 30/36 (CAT) OVERVIEW SECTION OVERVIEW PAGE Specification Overlook / Maintenance Materials Elevator Control Box... - Page 14 AT A GLANCE SPECIFICATIONS AND OFF SEASON STORAGE Elevator 30/36 With Woodchuck Maintenance Material Specifications Two Belts: 15W = 40 Multi-Viscosity Motor Product Horizontal Belt In Hopper Feeds Material Oil. Transfer: Engine Oil: Into Inclined Belt. (See Operation Manual For Special Conditions).
- Page 15 AT A GLANCE ELEVATOR’S CONTROL BOX ITEM FUNCTION PAGE Key Ignition Belt Controls Speed Control Horizontal Belt Controls Desticker Belts Selector Valve Hydraulic Jack Engine Display Gauge Woodchuck...
-
Page 17: Operating Procedures
OPERATING PROCEDURES ELEVATOR OPERATING OVERVIEW PAGE SECTION OVERVIEW Elevator Operating Checklist Elevator's Controls Towing Instruction Off Season Storage Maintenance Schedule Trouble Shooting... -
Page 18: Elevator Operating Checklist
OPERATING PROCEDURES ELEVATOR OPERATING CHECKLIST Prior To Operation The Following Items Must Be CONVEYOR BELT ADJUSTMENTS Checked And / Or Adjusted For Safe Operation, And To Avoid Unnecessary Wear And Stoppages The Tension Of The Belts Should Be Tight 1. Check Engine Air Filter See Engine Air Filter Enough To Prevent Slipping When Under Maintenance Instructions Pages 15 –... -
Page 19: Operations Procedures
OPERATING PROCEDURES ELEVATOR'S CONTROLS 6. Selector Valve: Push Handle Forward For Use Of CONTROL BOX The Hydraulic Jack. Pull The Handle The Back 1. Key Switch And Ignition: For Control Of The Woodchuck To Be Raised To Start Engine In Idle Position The (Out Of Operation Position) Or Lowered To The (In Service Position). -
Page 20: Towing Instruction
TOWING INSTRUCIONS OFF SEASON STORAGE Inspect Belts, Hoses And General Appearance Of The 30/36 Elevator Is Designed To Be Towed By A Engine And Chassis. Repair Or Replace Items That Suitable Towing Vehicle. The 30/36 Elevator Weighs Show Wear Or Damage. Replace All Safety Shields, 7,720 Lbs. -
Page 21: Maintenance
4. Check Conveyor Belt Tension. The Conveyor Belts Must Be Tight Enough To Carry A Full Continue Maintenance At Discussed Intervals Through The Load Without Slipping. Life Of The 30/36 Elevator. Check Engine Operation Manual For Other Engine Maintenance. (Before Operation) -
Page 22: Trouble Shooting
May Occur, And Some Possible Causes And Remedies. If The Solution To These Problems Or Any Other Problem Is Not Readily Apparent. Contact Your Jackrabbit Dealer Or Jackrabbit Direct. Phone (209) 599-6118 Or Fax (209) 599-6119. Warning: Do Not Check For Fuel Or Hydraulic Leaks With Your Hands.