Optional Plugin Module Installation Procedure - gefran G-Vision 66-070 Operating Instructions Manual

5.4. Optional plugin module installation procedure

Below you can find relation between modules and max number of modules that can be used into G-Vision 66 e GF_Connect
devices, based on their Interface Type:
Module
GV_PLUG-CAN
GV_PLUG-3G
GV_PLUG-232
GV_PLUG-485
GV_PLUG-LTE_WIFI_GPS
Max modules refers to max number of modules can be plugged into the HMI (all slots).
If you are planning to use GV_PLUG-232 and GV_PLUG-485 (additional serial ports) you will obtain following "COM -
Slot#" association:
• a module plugged in Slot#1 or into Slot#2 will be COM2,
• a module plugged in Slot#3 or into Slot#4 will be COM3.
If you are planning to use two GV_PLUG-CAN (CAN interface) you will obtain following Slot# association:
• a module plugged in Slot#1 or into Slot#2 will be the CanPort 0,
• a module plugged in Slot#3 or into Slot#4 will be the CanPort 1.
A detailed description of Plugin modules can be found in the specific manual
14
Application
CAN
3G modem
Serial RS232
Serial RS485
4G wireless modem
Max Modules Interface Type
2
1
2
2
1
Bus Extension
connector
CAN Y
Y
Serial Y
Serial Y
Y
81085_G-Vision 66_12-2021_ENG