Alpine HALO9 Quick Reference Manual page 18

2
Connect all other leads of the unit
according to details described in the
"Connections" (page 19).
3
Mounting the unit in a car.
• Fix the cables carefully. Do not damage them by tucking
them into movable parts, such as a seat rail, or by
locating them against sharp or pointed edges.
Installing the Unit (iLX-F509/iLX-F511)
1
Mount the original mounting bracket to the
main unit using the supplied screws.
• If you do not have the original mounting bracket,
mount the Double din KIT* (provided with the
side mounting bracket), etc. to the main unit.
* Sold separately.
Original Mounting
Bracket
2
Connect all other leads of the main unit
according to details described in the
"Connections" (page 19).
3
Mount the unit in a car.
• Fix the cables carefully. Do not damage them by
mounting them into movable parts, such as the seat rail,
or by locating them against sharp or pointed edges.
16
-EN
ALPINE iLX-F509 68-41657Z87-A_QRG (EN)
Adjust the up-down position of the
Display unit (iLX-F509/iLX-F511)
Adjust the up-down position of the display according
to the mounting position on the vehicle before
mounting the display unit.
Default setting: 0 mm
1
Remove the 4 screws on the rear of the
display unit, then adjust the up-down
position.
Screws (M5 × 8)
(included)
2
Attach the Sheet Rear in a position that
aligns with the up-down position of the
display unit.
Sheet Rear
(Included)
2×50 mm:
2×35 mm:
2×20 mm:
0 mm
-30 mm
Screws (M2.6× 8)
up-down position
for up-down position 0 mm or -60mm
for up-down position -15 mm or -45mm
for up-down position -30 mm
-15 mm
Sheet Rear Sheet Rear
(2×50 mm) (2×35 mm)
-45 mm
Sheet Rear
(2×20 mm)
Sheet Rear
(2×35 mm)
Sheet Rear
(2×20 mm)
-6
3
Att
dis
Se
cap
Install
iLX-F51
1
Fix
un