Mitsubishi Diamond Plus 92 User Manual page 13

Item
Group
Icon
Icon
CORNER PURITY(TL)
CORNER PURITY(TR)
CORNER PURITY(BL)
CORNER PURITY(BR)
MOIRE CANCEL LEVEL
CLAMP PULSE POSITION
FACTORY PRESET
HORIZ-CONVERGENCE
VERT-CONVERGENCE
FACTORY PRESET
DEGAUSS
POWER SAVE
CONTROL LOCK
NOTE
"BRIGHT" and "CONTRAST" are unavailable at the locked condition.
OSD POSITION
OSD TURN OFF
DIAGNOSIS
LANGUAGE
AUTO SAVE
NOTE
When selecting "OFF", if "SAVE" is not done before the OSD screen disappeared, the new setting is invalid.
ALL RESET
FACTORY PRESET
Press the Minus Button
Item
To adjust the purity condition on the top-left corner.
To adjust the purity condition on the top-right corner.
To adjust the purity condition on the bottom-left corner.
To adjust the purity condition on the bottom-right corner.
To decrease the level of the moire-lear wave.
To eliminate an excessive green or white-back ground that may occur
when external sync signals are applied to the monitor.
To clamp the video signal at the
front of the H-Sync pulse.
To adjust the horizontal beam alignment on the full screen area.
To adjust the vertical beam alignment on the full screen area.
To select the constant power
consumption mode.
To permit all OSD adjustments.
To move the OSD screen position
in a counter clockwise direction.
To adjust the time that the OSD screen is displayed for when no buttons
are pressed, before it disappears.
Indicates the current scanning frequency, factory or user preset timing
number, and signal input connector.
To choose the language used on OSD.
ENG.....English, FRA.....French, ESP.....Spanish, GER.....German, JPN.....Japanese
To save the new setting with a
comfirmation message.
Restores all items to the factory preset level.
- 9 -
Press the Plus Button
To clamp the video signal at the
back of the H-Sync pulse. If you
connect to an older Macintosh, you
may need to press plus button.
To restore to factory preset level.
To restore to factory preset level.
To eliminate possible color shading
or impurity due to magnetic effects.
To select the power-save mode.
(Your computer must be set for
power management.)
To lock the OSD function except for
"BRIGHT" and "CONTRAST".
To move the OSD screen position
in a clockwise direction.
To save the new setting automatically.
To restore to factory preset level.
X: Available
A B C
X X X
X X X
X X X
X X X
X X
X
- - -
X X X
X X X
- - -
X X X
X
X X X
X X X
- - -
X
X
- - -