Universal Audio Volt 1 Hardware Manual page 12

Problem
No power
Host
indicator
doesn't light
Crackling
audio,
dropouts,
glitches
(PC) ASIO
driver not
available in
DAW
Volt 1 Specifications
For Volt 1 specifications, please
Solution
Make sure Volt is connected to a port that
•
meets USB 2.0 specifications.
If bus power is insufficient, connect Volt to
•
external 5VDC power to compensate for the
underpowered USB port.
Make sure the power switch is in the ON
•
position.
Power Volt off and back on.
•
Try a different USB port or USB hub.
•
Try a different USB cable.
•
Increase the buffer size setting in the software
on your computer. When recording, you can use
direct monitoring to record without latency at
higher buffer sizes.
Install the Volt hardware driver with the UA
Connect app.