Selecting The Cleaning Mode - PRO-SYS VarioSonic 5203-969 User Manual

Selecting the Cleaning Mode

VarioSonic offers five distinct brushing modes designed to maxi-
mize the cleaning power of our exclusive brush heads by optimiz-
ing three key parameters: rotational velocity, dynamic motion and
articulation. All five modes offer highly effective cleaning. Simply
choose one that feels right for you and leaves you feeling most
refreshed.
SELECT MODE
Press the mode selector button to begin the brushing cycle.
Pressing the button once starts the brush in mode 5, our strongest
setting. Pressing the button again (within three seconds) moves
to the next mode, and the next mode after that. (For example: to
select mode 2, press the button four times with no more than three
seconds in between.) If you wait longer than 3 seconds to press
the button, it will turn the brush on and off.
USING THE TIMER
VarioSonic features a built-in timer automatically programmed
for the ideal two-minute brushing session. See page 11 for
more information.
STOPPING THE BRUSH
Pressing the mode selector button at any time after the brush
has been operating for three seconds or more will end the
cleaning cycle.
9
What's In The Box | User Manual | Technical Data