Reordering Brush Heads - PRO-SYS VarioSonic 5203-969 User Manual

Reordering Brush Heads

REPLACE BRUSH HEADS WHEN WORN OR EVERY
THREE MONTHS, WHICHEVER COMES FIRST
VarioSonic brush heads are designed exclusively for use with the
VarioSonic power toothbrush. To maintain maximum effectiveness,
it is important to replace them regularly—before they become
worn. Softer bristles will need to be replaced more frequently.
TO PROTECT BRUSH HEADS AGAINST PREMATURE
WEAR OR DAMAGE, FOLLOW THESE TIPS
• Rinse brush heads thoroughly after each use.
See page 12 for more information.
• Never rinse the brush heads with scalding hot water. Doing
so may damage the fibers or warp the entire brush head.
• Do not exert unnecessary pressure while brushing. Use only
the amount of pressure required to maintain contact with
teeth and gums while letting the brush do the work.
• Always allow brush heads to air dry thoroughly between uses.
TO REORDER
Visit www.pro-sys.com or call 1-866-776-7971.
18 What's In The Box | User Manual | Technical Data