Table of Contents
Advertisement
Regenerate the softening
system
In order to maintain trouble-free
operation of the water softening system,
the device regularly performs a
regeneration of the water softening
system.
The softening system is regenerated in
all programs before the end of the
main wash cycle. This increases the
running time and consumption values
of, for example, water and electricity.
Overview of the consumption values
when regenerating the
softening system
Here you will find an overview of the
maximum additional runtime and
consumption values when regenerating
the softening system.
Regenerating the softening
system after x washes
Additional running time in minutes
More water consumption in litres
More power consumption in kWh
The stated consumption values are
laboratory measured values which
are determined according to the
currently valid standard and on the
basis of the Eco 50° program and the
factory-set water hardness value of 13
- 16 °dH.
G
lance flushing system
s
You can use dishes and glasses with
wash off without a hitch using the
rinse system and rinse aid.
rinse aid
For optimal drying results it is best
to use the rinse aid.
Only use rinse aid for household
dishwashers.
Filling rinse aid
If the rinse aid refill indicator lights up,
add rinse aid. Only use rinse aid for
household dishwashers.
Press and lift the tab on the lid of
1.
the rinse aid reservoir .
6
7
5
0.05
Top up the rinse aid up to the max
2.
mark.
Rinse SystemNL
2
1
27
Advertisement
Table of Contents
