Use 5 - La Boite Concept SQUARE Notice/User Manual

U SE
1. Installation of the belt :
1. Remove the vinyl support plate to gain access to the motor set.
2. With your left hand, gently hold the belt in the groove of the pulley provided.
3. With your right hand, stretch the belt from the pulley to the deck without stretching it.
4. Carefully wrap the belt around the tray without making any folds.
5. The belt should be located in the middle of the tray thickness.
6. Replace the vinyl support plate.
54
2. Place your leather felt on the vinyl support plate.
3. Then place your vinyl.
4. Switch the Master ON/OFF button on the left side to turn on your turntable. The
vinyl is spinning.
55