La Boite Concept SQUARE Notice/User Manual page 27

3. Depending on your wishes, the protective cover can be removed or not.
Be careful when removing the transparent cover :
Push the assembly (cover + hinges + pins) backwards as shown in the illustration
!
below. Under no circumstances should you unscrew the screws on the hinges.
52
4. To connect the turntable to your audio system, use the supplied RCA / GROUND cable and
power plug. Please follow the connection instructions below:
1 /
Connect the ground
pin: unscrew with with a flat
screwdriver the pin slightly to
insert the fork of the RCA /
GROUND cable. Screw the pin
2 /
Connect the RCA cables.
back in until the fork is secure.
5. Then connect the other side of the RCA / GND cable to your audio equipment. Take care to
connect the left and right channel correctly. The right channel is usually red and the left channel
white, black or blue.
Note: If you connect the SQUARE turntable in preamplified mode, there is no need to
connect the ground to your audio equipment.
6. Your turntable is ready for use.
3 /
Connect the power supply
to the turntable, then plug the
transformer into your wall socket.
53