Table of Contents
Advertisement
Configurable sensor inputs (3 for S4, 1 for S1)
Note: the Tempus AG S1 has only one configurable sensor input.
Temperature sensor (S4 only)
Note: the Tempus AG S1 doesn't have temperature sensor input.
Types of sensors that can be connected:
• Dry contact (rain sensor, wind sensor, ...)
• Pulse (flowmeter, wind sensor, ...)
• Analog (0-3.5V) (moisture sensor, solar radiation ...)
Example of connecting an analog input sensor:
VH400 moisture sensor
The black wire (- Symbol) of your TEMPUS-AG-MS
must be connected to the
moisture sensor
The
yellow wire
(+ Symbol) of your TEMPUS-AG-MS
must be connected to the black wire of the VH400
moisture sensor
The
red wire
(lampo Symbol) of your TEMPUS-AG-MS
must be connected to the
moisture sensor
Temperature sensor Input
(PT100 Standard)
The
orange wire
(+ Symbol) of your TEMPUS-AG-MS
must be connected to one of the two
the temperature sensor
The
orange wire
(- Symbol) of your TEMPUS-AG-MS
must be connected to the white wire of
the temperature sensor
Toro TEMPUS-AG-MS
gray wire
of the VH400
red wire
of the VH400
red wires
of
6
Advertisement
Table of Contents
