Table of Contents
Advertisement
Toro TEMPUS-AG-MS
Step 2
ASSOCIATION
1. Unscrew the TEMPUS-AG-MS 's cap
2. Plug the 9V 6LR61 ou 6AM6 battery and screw the cap
3. Sign in with your MyToroTempus account
4. Launch Tempus AG app from your smartphone and/or tablet.
5. Click on the «Add a device» button or on the «+» button
6. Choose the TEMPUS-AG-MS from the availabe devices list.
7. To finish your TEMPUS-AG-MS pairing, follow the next steps described in the app.
Note: To identify your TEMPUS-AG-MS among the nearby devices, please refer to the «Default name» present
on the product label.
Security key: The security key allows to protect your device. You can define it during the step 7 of the
ASSOCIATION» or access to further information by clicking on the icon
at the top right of your screen.
Step 3
PAIRING WITH TEMPUS-AG-4G/WF
TM
To optimize the LoRa
radio connection between theTEMPUS-AG-4G/WF and the TEMPUS-AG-MS device, we advise to
install the TEMPUS-AG-MS under 800 meters to theTEMPUS-AG-4G/WF. We also advise to associate all your Tempus
AG device near the TEMPUS-AG-4G/WF before installing them.
1. On the MyToroTempus mobile App, select yourTEMPUS-AG-4G/WF, and enter pairing mode on the
information screen. (You must be connected via Bluetooth)
2. Select the TEMPUS-AG-MS device previously installed.
3. Click on the top right icon
to access to the product's informations.
4. Click on «Remote Access».
5. Select theTEMPUS-AG-4G/WF you want to pair the device with.
6. Click on the button «Send»
on the bottom of your screen to validate.
Once the pairing finished, you can test the connection between yourTEMPUS-AG-4G/WF and your TEMPUS-
AG-MS
7. Go back to «Remote access» screen.
8. Click on the button
to start the test.
Note:
- The message «Connection established» means that the connection is reliable.
- The message «No connection established» means that it is necessary to bring the TEMPUS-AG-MS closer
to the TEMPUS-AG-4G/WF or viceversa.
4
Advertisement
Table of Contents
