Table of Contents
Advertisement
Quick Links
IA FLEX CUBE
WORKSTATION
Assembly Instructions
any wooden tops over and inspect the bottom sides for markings.
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
Iron Age Office Operations Manager
678-725-1473 (c)
hd@ironageoffice.com
please contact:
Henry Dover
Advertisement
Table of Contents
Related Manuals for Iron Age Office FLEX CUBE
Summary of Contents for Iron Age Office FLEX CUBE
- Page 1 WORKSTATION Assembly Instructions Thank you for your purchase! Iron Age Office furniture is uniquely and individually fabricated. For this reason, your furniture is pre-assembled and labeled before shipping. Labels are marked on the underside of the furniture. Most furniture is then deconstructed prior to shipping.
- Page 2 HARDWARE Screws are shown actual size. You may receive extra hardware with your unit. Tools Required #3 Square Drive 14-10 LAG BOLT LEVELING FOOT 9/16 Crescent Wrench 7/32 Hex Drive 3/8-16 BOLT PARTS STANDARD LEG SHORT WALL LONG WALL MAIN TOP END CAP T BRACKET CROSS BRACKET...
- Page 3 ASSEMBLY STEP 1 Screw in leveling feet to bottoms of all walls. Screw in leveling feet into walls with 9/16 crescent wrench. STEP 2 Flip one short wall to an upright position. Secure two end caps to the top and bottom of the wall using 3/8-16 bolts.
- Page 4 ASSEMBLY STEP 4 Align long wall to the connection of the short walls. Secure long wall with 3/8-16 bolts into T-brackets at top and bottom of the walls. Screw in 3/8-16 bolts into top and bottom of the connection of the three walls.
- Page 5 ASSEMBLY STEP 7 Align and secure long wall to connection of the long and short walls to the cross bracket with 3/8-16 bolts. STEP 8 Align and secure short wall to long wall with T-brackets at top and bottom of walls.
- Page 6 ASSEMBLY STEP 10 Begin building your desks. Place all tops face down on a clean surface. STEP 11 Align legs to tops using markings on desk. Secure with (4) 14-10 lag bolts in each leg. Screw in (4) 14-10 Lag bolts in each leg using a #3 square drive.
- Page 7 STEP 14 Enjoy your workstation! CARE INSTRUCTIONS To care for either wooden or metal surfaces of Iron Age Office products, gently wipe with a soft cloth dampened with water and a mild dishwashing liquid. Once satisfied, dry with a soft cloth.
Need help?
Do you have a question about the FLEX CUBE and is the answer not in the manual?
Questions and answers