Advertisement
Table of Contents
FORTIS 4 PERSON
L-SHAPE SIT/STAND
WORKSTATION
Assembly Instructions
any wooden tops over and inspect the bottom sides for markings.
Thank you for your purchase!
Iron Age Office furniture is uniquely and individually
fabricated. For this reason, your furniture is pre-assembled
and labeled before shipping. Labels are marked on the
underside of the furniture. Most furniture is then
deconstructed prior to shipping. Pieces that uniquely
correspond can typically be found on the same pallet.
Assembly is best completed by keeping the pieces that
correspond together. Clear your work area of anything that
could scratch furniture surfaces. If possible, cover your
work area with a clean, soft blanket. Carefully flip
Match legs, flat brackets, etc.
to the appropriate labels.
If you need further assistance of any kind,
please contact:
Iron Age Office Operations Manager
678-725-1473 (c)
hd@ironageoffice.com
Henry Dover
Advertisement
Table of Contents
Related Manuals for Iron Age Office FORTIS
Summary of Contents for Iron Age Office FORTIS
- Page 1 WORKSTATION Assembly Instructions Thank you for your purchase! Iron Age Office furniture is uniquely and individually fabricated. For this reason, your furniture is pre-assembled and labeled before shipping. Labels are marked on the underside of the furniture. Most furniture is then deconstructed prior to shipping.
- Page 2 HARDWARE Screws are shown actual size. You may receive extra hardware with your unit. Tools Required #3 Square Drive 14-10 LAG BOLT QTY: 84 SCREEN BOLT 3/8 Hex Drive QTY: 20 SCREEN NUT 15/16 Crescent Wrench QTY: 20 LEVELING FOOT 9/16 Crescent Wrench QTY: 18...
- Page 3 PARTS THIRD TOP STANDARD LEG LEFT TABBED LEG SIT STAND BASE FOURTH TOP RIGHT TABBED LEG *Instructions and hardware included in sit stand packaging. TROUGH RETURN TOP LEFT TABBED LEG SECOND RETURN TOP DIVIDER SCREEN RIGHT TABBED LEG FLOORMOUNT DIVIDER LEFT TABBED LEG THIRD RETURN TOP SCREEN...
- Page 4 ASSEMBLY STEP 1 Place wood tops face down on a clean surface. STEP 2 Assemble sit stand base according to package instructions. Align legs using markings on the underside of the wood tops. Tabbed legs should be placed so that tabs are facing each other.
- Page 5 ASSEMBLY STEP 4 Attach screens to front tabbed legs with (4) screen bolts and (4) screen nuts in each screen. Insert screen bolts into the front of the screen through the tabbed legs using a 3/8 hex drive. Fasten screen nut to screen bolt on backside of screen using a 15/16 crescent wrench.
- Page 6 ASSEMBLY STEP 6 Flip M1 desk to an upright position. Align to M2 desk. Secure M1 desk to M2 desk with (4) lag bolts into divider screen on the underside of the M1 desk with a #3 square drive. STEP 7 Align floor-mount divider screen to M4 desk.
- Page 7 STEP 11 Enjoy your desk! CARE INSTRUCTIONS To care for either wooden or metal surfaces of Iron Age Office products, gently wipe with a soft cloth dampened with water and a mild dishwashing liquid. Once satisfied, dry with a soft cloth.
Need help?
Do you have a question about the FORTIS and is the answer not in the manual?
Questions and answers