Download Print this page

Chad Valley 328/9309 Assembly & User Instructions page 3

Toddler swing, climber & slide

Advertisement

WARNING. FOR DOMESTIC USE ONLY.
Please check to ensure all parts are present before you
start the assembly of this unit. If any missing parts,
please properly store the product away and contact our
customer service representtives for assistance.
Assembly by adult(s) required. Do not allow children
nearby during assembly to avoid choking hazard from
small parts.
Constant adult supervision is required during use of this
product.
At the start of assembly, do not tighten bolts/nuts
completely so as to allow some possible adjustment.
After all major components are assembled, go back over
all bolts and nuts and properly tighten all of them before
using this product.
The Climber & Slide is suitable for age 3-8 with maximum
user weight of 45kg.
The Toddler Swing is suitable for ages 12-36 months
with maximum user weight of 25kg.
The equipment is designed for outdoor domestic use
only and is not permitted for hiring or commercial use.
Adult supervision is required at all times while the equipment
is in use. Never leave children unattended during play.
Do not use the equipment in any manner other than
intended.
Please retain these instructions for future reference
The product should not be installed over concrete,
asphalt or any other hard surfaces. The equipment
should be placed on a level surface at least 2 m from
any structure or obstruction such as a fence, garage,
house, overhanging branches, laundry lines or
electrical wires.
Do not use the equipment until it has been fully
assembled and anchored, and all the components are
properly secured.
Never allow children to disembark from the play
equipment whilst it is still in motion.
Ensure that children are not facing the sun whilst using
the equipment.
Do not attach items to the equipment that are not
specially designed for use with this product, including
but not limited to cables, skipping ropes and chains as
they may cause strangulation hazards.
Never allow children to walk too close to, in front of,
behind or in between the equipment whilst in use.
Always keep children at a safe distance from the product
whilst in use.
Do not allow reckless playing, such as jumping off,
standing on seats or climbing ropes.
Do not allow children to use when the equipment is
wet.
2
Instruct children to avoid swinging the empty swing and
not twist the swing chain or loop them over the top
support bar since this may reduce the strength of the
chain or rope.
Do not allow children to climb on the structure of the
swing (eg legs, top bar, cross bars and other parts).
Instruct child to sit in the centre of the swing with their full
weight in the center of the seat.
Ensure that children wear suitable clothing whilst using
this equipment. Never allow children to wear loose
clothing, neck ties, scarves, drawstrings or loose
jewellery.
Please remove all packaging and packing tags/ wires
before allowing children to ues. Please take note: As
an extra precaution, check this product regularly for signs
of wear or damage.Protective surfacing: One of the most
important things you can do to reduce the likelihood of
serious head injuries is to install.Shock-Absorbing
Protective Surfacing (over the ground) under
and around your play equipment. If you use loose-fill
materials such as wood mulch/chips, engineered wood
fibre, or shredded/recycled rubber mulch for equipment
up to 8 feet high, and 9 inches of sand or pea gravel for
equipment up to 5 feet high. NOTE: an initial fill level of
12 inches will compress to about 9 inch depth of
surfacing, and settle. The surfacing will also compact,
displace, and settle, and should be periodically refilled to
maintain at least a 9-inch depth. Carpeting and thin mats
are generally not adequate protective surfacing, check
and maintain the depth of the loose-fill surfacing material,
Maintain the right amount of loose-fill material. Do not
install loose fill surfacing over hard surfaces such as
concrete or asphalt.
Please carry out checks and maintenance of the
main parts (Crossbeams, suspensions, anchors, nuts and
bolts) before each use. If these checks are not carried out
the product could overture or otherwise become a hazard.
It is of particular importance that they be followed at the
beginning of each season as well as at regular intervals
during the usage season.
Check all nuts and bolts for tightness and tighten when
required; Oil all metallic moving parts; Check all coverings
for bolt and sharp edges and replace when required;
Check swing seats, chain, ropes and other means of
attachments for evidence of deterioration. Replace when
required in accordance with the manufacture's
instructions.
Do not use when temperature drop below 32 degree F.(0
degree C).

Advertisement

loading