1. Manuals
  2. Brands
  3. Chad Valley Manuals
  4. Play Sets & Playground Equipment
  5. 745/5744
  6. Assembly & user instructions

Chad Valley 745/5744 Assembly & User Instructions

Cv slide and hide multiplay
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CV SLIDE AND HIDE MULTIPLAY
Assembly & User Instructions -
Important
Age Limit: 3-8 years.
Max user weight: 45kg
Total user weight must not exceed: 225 kg
Max user:
- Swing (1) per seat
- Canopy mat (2)
- Slide (1)
Important -
Please read these instructions fully before assembly or use.
These instructions contain important information which will help you get the best from your
product and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the
Please keep for future reference
Tips: It will take 2 adults
around 90 minutes to
assemble.
Customer Helpline: (+44) 0330 0904 420
745/5744

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 745/5744 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chad Valley 745/5744

Summary of Contents for Chad Valley 745/5744

  • Page 1 CV SLIDE AND HIDE MULTIPLAY Assembly & User Instructions - 745/5744 Please keep for future reference Important Age Limit: 3-8 years. Max user weight: 45kg Total user weight must not exceed: 225 kg Tips: It will take 2 adults Max user:...
  • Page 2 Contents BEFORE YOU START TO ASSEMBLE • Check the package and make sure you have all of the parts listed in the part list section of this user manual. IF ANY PARTS ARE MISSING, please call the Customer Service toll-free number listed on the cover page for assistance. •...

  • Page 3: Warning

    Warning Important –Please read these instructions fully before assembly or use. PLAY SUPERVISION ● DO NOT allow more than one child to slide down the slide at WARNING the same time. ● DO NOT allow children to stand on the slide. READ ALL INSTRUCTIONS BEFORE ASSEMBLING OR ●...

  • Page 4: Parts

    Part List If you have damaged or missing parts, call the Customer Helpline: (+44) 0330 0904 420 Please Check you have all the parts listed below Top Right Beam x 1 Top Left Beam x 1 VIEW PRODUCT VIEW PRODUCT Upper Tube x 6 Canopy Tube x 4 VIEW PRODUCT...
  • Page 5 Hardware List If you have damaged or missing parts, call the Customer Helpline: (+44) 0330 0904 420 Please Check you have all the parts fittings listed below Note: The quantities below are the correct amount to complete the assembly. In some cases more fittings may be supplied than are required.

  • Page 6: Table Of Contents

    Part List for Slide If you have damaged or missing parts, call the Customer Helpline: (+44) 0330 0904 420 Please Check you have all the parts fittings listed below Part list for Slide (Part NO. 17) Plastic panel x 1 Plastic panel x 1 Plastic sheet x 1 Support panel x 2...
  • Page 7 Assembly Instructions Step 1 Connect and secure all connection points shown using B, L, M and Q. DO NOT FULLY TIGHTEN THE BOLTS UNTIL THE ENTIRE FRAME IS ASSEMBLED IN STEP 5. ENLARGED DIAGRAM FOR ALL CONNECTION POINTS x8pcs x16pcs x8pcs x8pcs...
  • Page 8 Assembly Instructions Step 2 Connect (10), (10A) and (11) to Canopy Tube (4) as shown. DO NOT FULLY TIGHTEN THE BOLTS UNTIL THE ENTIRE FRAME IS ASSEMBLED IN STEP 5. x8pcs x16pcs x8pcs x8pcs...
  • Page 9 Assembly Instructions Step 3 IN THIS STEP, YOU WILL NEED TO INSERT STEEL TUBES INTO THE MAT AND CONNECT THEM TO THE FRAME. ASSEMBLE IN THE FOLLOWING ORDER: 1. Insert (7) through the side of mat with 2 openings (this side will be used for installation of the slide later).
  • Page 10 Assembly Instructions Step 4 - Attach (14) to (7) using G, J, K and P as shown - Connect (12) to (14) using H13, J, K and P as shown - Connect (12) to (10) using H, J, K and P as shown DO NOT FULLY TIGHTEN THE BOLTS UNTIL THE ENTIRE FRAME IS ASSEMBLED IN...
  • Page 11 Assembly Instructions Step 5 - Connect (13) to (9) on both sides using G, J, K and P as shown. - Connect (12A) to (8) using G, J, K and P as shown - Connect (13) to (11) on both sides using H, J, K and P as shown.

  • Page 12: Assembly Instructions

    Assembly Instructions Step 6 Install the canopy (15) over the assembled platform as shown. Connect the buckles on the canopy to buckles on the bottom of the mat to hold it securely in place. Wrap the Velcro straps inside the canopy to the four support legs.
  • Page 13 Assembly Instructions Step 7 Attach the basketball net (21) to the hoop, then connect the hoop to the basketball board (19) together with Top Right Beam (1) on the back. Secure with R, O and I as shown in the large diagram.
  • Page 14 Assembly Instructions Step 8 Assemble the swing side in the following order: - Insert (5) into (3) and secure together with (6) on the outer side of swing using D, N, L, M and Q. Make sure to attach Plastic Cap (S) onto rail (6) first.
  • Page 15 Assembly Instructions Step 9 - Connect (1) and (2) and secure with C, L, M and Q as shown in Diagram A. - Connect the swing (16) to (1) using A, L, M and Q as shown in Diagram B. Diagram A Diagram B x4pcs...
  • Page 16 Assembly Instructions Step 10 ASSEMBLY INSTRUCTION FOR SLIDE Place (H3) over (H1) and (H2) as shown. The end of plastic sheet with teeth needs to be placed on the end tilting upward. Make sure the holes on the sides of (H1) and (H2) are facing outward.
  • Page 17 Assembly Instructions Step 11 Two people needed for this step. Turn slide over. Slide H7 into the end of plastic sheet with teeth. Tip: gently push the plastic sheet upward with one hand, line up the teeth with the corresponding indents on the bottom of H7 and push it gently to slide it into place.
  • Page 18 Assembly Instructions Step 12 Secure H4 to the bottom of the slide with H5 and H6 using H10 and H11. x4pcs x4pcs...
  • Page 19 Assembly Instructions Step 13 Insert H8 into H2 and H8A into H1. Holes should be facing outward. Secure using H9 and H12 on both sides. Secure H8 and H8A to H7 using H13 and H14 on both sides. x2pcs x4pcs x2pcs x4pcs...
  • Page 20 Assembly Instructions Step 14 Attach the slide to the canopy frame by connecting H8 and H8A to 14 using H, J, K and P. Now check all connection points and fully tighten all bolts installed. J K P x2pcs x4pcs x2pcs x2pcs...
  • Page 21 Assembly Instructions Step 15 Anchor the equipment to the ground as shown. Point the anchors at a 45 degree angle and use a hammer to insert fully into the ground. WARNING! BEFORE USE, please check all parts and hardware are correctly fitted and secure.
  • Page 22 Assembly Instructions SWING SEAT ADJUSTMENT GUIDE THE LENGTH OF THE ROPE IS ADJUSTABLE TO ACCOMODATE THE HEIGHT OF THE CHILD. TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE THROUGH THE HOLE TO THE APPROPRIATE LENGTH AND RE-TIE THE KNOT AGAIN.
  • Page 23 3 years due to small parts, chocking hazard. l l a n i l (+44) 0330 0904 420 Produced for Chad Valley Toys. Argos Ltd. Country of origin: China Address: 489 - 499 Avebury Boulevard, Central Milton Keynes, MK9 2NW. www.argos.co.uk SP-19-SW088-ARGOS-17001...

Table of Contents