Table of Contents
Advertisement
RADIO OPERATION
Switch Between USA area and Europe area Frequency
In radio mode, press and hold the SEL button to enter audio / function, then press the SEL button
repeatedly to access the state of the US and EU frequency, then rotate it to switch between US(USA)
and EU(europe) frequency. The system will change the frequency setting in about 3 seconds.
Change Bands
In radio mode, shortly press the BND/AMS button to switch between the FM1(F1), FM2(F2), FM3(F3)
and AM1(A1), AM2(A2) bands.
To Store / Recall Preset Stations
The radio can be stored 6 preset stations for each band (FM1, FM2, FM3, AM1 and AM2) for atotal of
30 preset stations.
- To memorize a station:
Press and hold the desired preset buttons (1-6) to save a radio station.
- To recall a preset station:
Briefly press the respective station button (1-6) to recall the corresponding preset station.
Manual Tuning
In the radio mode:
Press and hold the
or
button to enter the manual tuning mode.
In manual tuning mode, briefly press the
or
button to search the next or previous frequency
step by step.
Seek Tuning
In radio mode, press the
or
button, the automatic search will start, it will search upward or
downward for the strong signal radio station within the cuttent band. The auto searching will stop until
find a station.
Automatic Store Preset station (AMS)
Press and hold the BND/AMS button to store 18 FM stations and 12 AM stations automatically.
Automatic Preset Scan
Briefly press the AMS button on the remote control to recall each preset station that stored in the
memories in each band.
LOCAL/DX
In urban areas, most stations are strong enough and "LOCAL ON" mode should be selected.
Switch to LOCAL OFF mode to search for stations with weaker signals.
Press the LOC button on the remote control to choose local or distant reception mode.
STEREO/MONO
FM station is received in stereo mode. However, if the signal is weak or reception is not as
good as you would like, switching to MONO mode usually improves the overall sound quality.
Press the ST button on the remote control to choose FM STEREO or MONO audio effect.
6
Advertisement
Table of Contents
